| |
120
|
 |
PRECISE, LIGHT AND ATTRACTIVE |
|
|
|
|
| TECH SPECS |
| Wing Span: 1.920 mm. |
| Fuselage: 1.990 mm. |
| Weight: 4.800 a 5.100 grs. |
| Engine:.120/160 2T/4T |
| Electric: Hacker C50 13XL |
| Gasolina: 3W24-28cm3 |
| Design: Marcelo Colombo |
| Fuselage Material: Wood |
|
 |
| As a result of the evolution of the Epsilon 90, the Epsilon 120 is the most advanced trainer of F3A and 3D flight of market. With an easy building process and having the chance to be motorized with gas engines, it results to be an economic airplane for those who want to start in F3A or 3D flight.
|
| VERSIÓN KIT |
  |
|
-Fuse 100% laser cut. - Wing, stab, rudder, turtle deck and hatch cover already sheeted in balsa with epoxi resine. - Canopy floor, fuse and wing box in 3 mm balsa with crossed vein.- Side canopy and hatch cover in laser cutted balsa. - Wing reinforcement in 3mm laser cutted plywood.- Balsa for ailerons, elevator and rudder for hinged already molded. - Engine coal and wheel pants with white gelcoat. - Transparent polycarbonate canopy, with film protection. Dural landing gear- Instruction manual and Sticker
|
|
| ARC. READY TO COVER |
 |
|
Includes the same components than the kit
The model comes already constructed, aligned & centered from factory. All these jobs are done by an experienced team of aeromodelers controlling every step to obtain the best construction quality.
All you have to do is decorate and install the model. |
|
|
| ARF. READY TO FLY |
 |
|
Includes the same components than the kit
The same construction job than in the ARC version has been done.
The covering of the fuse, wing, stab and rudder is done by experts who control the good looking and low weight of the model in order to obtain a perfect flight. For this we use perl Oracover of the maximum quality. |
|
|
|
|
|
